点击图片查看原图
应用：适用于动物细胞悬浮培养及微载体培养。（杂交瘤细胞、CHO细胞、昆虫细胞、哺乳细胞等）
| 罐体 | 工作体积（L） | 3 | 5 | 7 | 10 |
| 总体积（L） | 3.8 | 6.8 | 8.9 | 12.5 | |
| 材质 | 硼硅酸盐玻璃/配件和罐盖为316L不锈钢 | ||||
| 控制系统 | 控制面板 | 10.4″彩色触摸屏 | |||
| 通信接口 | 以太网远程控制（SCADA）、USB接口数据输出、 RS-485系统扩展 | ||||
| 程序储存量 | 可储存59，994个不同参数程序 | ||||
| 数据保存 | 10个数据文件 | ||||
| 数据储存接口 | USB接口 | ||||
| 箱体材料 | ABS共聚体面板、喷塑外壳 | ||||
| 大小 | 400×500×740mm（W×D×H） | ||||
| 额定电压 | 110V/220V; 50/60Hz | ||||
| 通风 | 进气流量计 | 1-10LPM | 2-20LPM | ||
| 喷雾管 | 环形空气分布器，通气孔开口向下 | ||||
| 挡板 | 可拆卸的316L不锈钢挡板 | ||||
| 温度 | 控制系统 | 恒温加热系统：内置热交换系统（400W加热器/水循环泵）、自动冷却水阀 | |||
| 范围 | 冷却液+5℃-60℃ | ||||
| 控制精度 | 0.1℃ | ||||
| 传感器 | Pt 100 | ||||
| 控制模式 | 可编程15步的PID控制系统 | ||||
| 搅拌 | 驱动 | 可拆卸的顶部无刷马达 | |||
| 转速范围 | 5-300 rpm | ||||
| 控制精度 | 1rpm | ||||
| 搅拌叶 | 2个可调角度3叶低剪切力搅拌桨 | ||||
| 控制模式 | 可编程15步的PID控制系统 | ||||
| pH | 范围 | 2-14pH | |||
| 控制精度 | 0.01pH | ||||
| 传感器 | 梅特勒耐热凝胶电极 | ||||
| 控制模式 | PID控制 | ||||
| DO | 范围 | 0-200% | |||
| 控制精度 | 0.1% | ||||
| 传感器 | 梅特勒耐热DO极谱电极 | ||||
| 控制模式 | PID关联控制: 控制搅拌转速升降、 富氧装置（可选）、开始补料系统 | ||||
| ORP | 范围 | -/+ 2000mV | |||
| 控制精度 | 1 mV | ||||
| 传感器 | 梅特勒耐热凝胶电极（可选） | ||||
| 消泡/ 液位 | 传感器 | 316L不锈钢： 聚四氟乙烯绝缘软管、开关控制器 | |||
| 蠕动泵 | 数量 | 4个内置，1个外置（可选） | |||
| 流量 | 0.06~341.25ml/min | ||||
| 速度 | 0-65 rpm | ||||
| 控制精度 | 1rpm | ||||
| 控制模式 | 15步补料控制，控制酸碱、消泡剂和补料 | ||||
| 排气装置 | 冷凝器 | 316L不锈钢冷凝管 | |||
| 过滤器 | 0.22u密理博盘式过滤器 | ||||
| 设备要求 | 电压 | 210-230V, 50/60Hz,带有电安全开关 | |||
| 水压 | 最大2 Bar（29psi） | ||||
| 气压 | 最大1 Bar（14.5psi），气体需干燥、游离、经过过滤 | ||||
The Winpact Gas Mixing Station al lows the user to optimize cel l growth conditions by independently supplying up to four gasses to the fermentation process. Winpact Parameters such as dissolved oxygen and pH can be controlled by adjusting the gas composition supplied to the system. The gas mixing station is directly connected to the Winpact control unit, al lowing it to respond to changes in DO and pH.。Four manually adjusted flow meters control the flow rate of each gas, whi le the 4 solenoid valves automatical ly open or close in response to the culture conditions.
The Gas Mixing Station can be operated in both manual or automatic modes.
Function：
Blend air,oxygen,carbon dioxide,and nitrogen in any proportion to optimize cell growth;
Adjust pH using CO2;avoid media dilution by addition of liquid acid; Control DO by addition of O2 gas;
Specifications:
| Control gases | Air, N2, O2 and CO2 | ||
| Control parameter | DO and pH | ||
| Components | 4 solenoid valves, 4 pressure gauges and 4 rotameters | ||
| DO Cascade | One-way(O2) or Bi-directional(O2 & N2) DO control | ||
| Flow rate range Note: The given flow rates are for total flow (4 gasses combined), at a rate of 2vvm. Flow rate range for each gas is customized to user requirements. | Vessel volume | Microbial | Cell culture |
| 3L | 0,1-10 LPM | Avai lable upon Request | |
| 5L | |||
| 7L | 0,2-20 LPM | ||
| 10L | |||
| 15L | 0,4-50 LPM | ||
| 20L | |||
Oxygen Enrichment with Mass Flow controller：
The mass flow control ler is an optional oxygen supplementation device for the Winpact system. Using a cascade response, the mass flow control ler is able to accurately adjust the flow rate of incoming oxygen to control the DO level within the vessel. Resistance to fluctuations in gas flow ensures precise control and repeatabi l ity of experimental conditions.
Function：
Resistant to flow variability from gas pressure changes；
Automatic control of flow rate to gas input；
Precise control of gas flow ratet；
Controlled manually or via DO control loop；
Hassle-free：comes built-in to the controller
Specifications:
| Components | Includes a manual rotameter and a mass flow controller |
| Function | (1) Manual oxygen flow rate adjustment (via Mass flow controller) (2) DO cascade control: Response to DO change |
| Rotameter Range | 3L、 5L：0 – 5 LPM； 7L、10L：0 – 10 LPM； 15L、20L：0 – 20 LPM； |